NETWORK TechnologyGSM / HSPA
LAUNCHAnnounced February, 2015
Released March, 2015
BODY SIZEDimensions 126.5 x 65 x 10.3
SIMSingle SIM (Mini-SIM) or Dual SIM (Mini-SIM/Micro-SIM, dual stand-by)
DISPLAY TypeTFT capacitive touchscreen, Color Display
Size4.0 inches, 45.5 cm2 (~55.6% screen-to-body ratio)
Resolution480 x 800 pixels, 5:3 ratio (~233 ppi density)
PLATFORM OSAndroid 4.4.2(KitKat)
CPUDual Core, 1.0GHz, ARM Cortex A7
GPUARM Mali-400 MP
MEMORYCard slot microSD, up to 32GB (dedicated slot)
Internal 4GB 512MB RAM
MAIN CAMERASingle 2 MP
Features flash, panorama
3.5mm jack Yes
ConnectivityWLAN Wi-Fi 802.11 b/g/n, hotspot
Bluetooth 4.0, A2DP
GPS Yes, with A-GPS
Radio FM radio
USB microUSB 2.0
GPSYes, with A-GPS, GLONASS, GALILEO, BDS
USB2.0, Type-Micro Usb
BATTERYRemovable Li-Ion 1300 mAh battery
ChargingFast battery charging
ColorsTitanium Black, Essential White, Fragrant Pink, Sky Blue, Sunshine Yellow
Other ModelsLiquid Z6 Plus, Acer Liquid Z200, Acer Liquid Z6E, Acer Liquid Z6 Max, Acer Liquid Z2 Dual,
Acer Acer Liquid S1, Acer Liquid S100, Acer Liquid E1 Duo V360, Acer Liquid E Plus
About 90 EUR
How To Flash Acer Liquid Z205 with SP Flash Tool
In this tutorial you will learn how to upgrade or downgrade or reinstall your Firmware on
Acer Liquid Z205 with SP Flash Tool software.
The first thing is that you must download the official firmware file and here you have the instruction
and of course you must download the SP Flash Tool software, MediaTek Driver and here is how to do it.
No1. download Acer Liquid Z205 official firmware, MediaTek Driver and SP Flash Tool,
No2. Extract Sp FlashTool and your acer liquid z205p firmware package to different folder.
No3. Go to SP FlashTool folder and Open SP Flashtool.exe as Administrator.
No4. Click on Scatter-loading, browse and go to the firmware folder,
Then select scatter file from the folder you extracted the downloaded firmware.
No5. Hit download button
No6. Now you can connect your phone power off mode to your computer with a micro USB data cable and wait
No7. until the drivers are installed it now as you can see phone it’s connected
No8. Now The Flashing Process Will Start and and you should wait for a few (5 to 10) minuites.
No9. You See a progress bar will start loading and you should Wait until complete.
No10. A green circle with Ok will popup to indicate the flashing process completion.
No11. Now you can disconnect the device and perform a factory reset before you power on fully.
No.12 Setup your phone and enjoy. All Done
We can not guarantee that the information on this page is 100% correct. if you get any problem with this solution just comment below or mail me [email protected] Thanks